About Us

Holland Maxer Trailer


Get your cranes moving to the job with the Holland Maxer trailer. This is the solution to haul crawler cranes faster and for less expense. Time is money and you will be down the road faster and easier with the Holland Maxer manufactured by HMR Supplies. 


Features & Benefits
    •    Four or five axle configurations
          -This creates the ability to meet tighter road restrictions
          -Use a three or four axle tractor to pull
    •    Optional sixth and seventh axle configurations for extreme axle requirements
    •    Caster axles with locks
          -Improved maneuverability
          -Increased tire life
    •    Lift axles for
          -Maximum onsite maneuverability by raising axles to shorten the turning radius
          -Easier maneuvering for narrow driveways or access roads
          -Saving money, fuel economy, and tire wear by lifting unused axles while empty traveling down the road
    •    Larger ground clearance than lowboys – prevents trailers from "getting hung up" while maneuvering
    •    Stable suspension for high center of gravity load
    •    Heavy duty 25,000 lbs. axles and suspension
    •    High strength alloy chains and hooks for tying down – fewer chains means less time wasted securing and un-securing loads
    •    Built-in pull out access steps

    •    Power tower with limited tilting fifth wheel plate for rough sites requiring more clearance and oscillation
    •    Manual tower with limited tilting fifth wheel plate to adjust for different truck heights and giving more clearance on rough sites
    •    Air scales for axle weights
    •    Storage boxes for remotes, rigging, and other crawler setup items
    •    Storage locations for outrigger floats for self assembling crawlers

Call today, 641-585-3630 for an estimate on a HOLLAND MAXER  trailer!

Container Storage



CR Holland Crane offers container storage in 10', 20', and 40' sizes.  

  • clean
  • delivered to your site
  • lockable 
  • short term and longer term rental avaialble. 


Container rental is available by calling 641-585-3630. 

Holland Wind Turbine



We are excited to confirm that we have installed a 100 KW wind turbine on the CR Holland Crane property.  The NPS 100C is the next generation of magnet direct drive distributed wind turbine.  This generator will service our facility with electricity, reduce our environmental impact and make the future better for us and our children. This has been a long and tedious process that is a long-term investment for our company and would not have been possible without the support and quick response from the City of Forest City.
The wind turbine will help offset our electrical usage and generate some electricity that will be sold back to the City of Forest City to reduce their required output; ultimately reducing the overall environmental impact.  The wind turbine will help us reduce our operational costs over the proposed 20 year life-cycle of the wind turbine.


IMG_1397 2017061295100628      
2017061395090238 20170613_091801


Freedom Rock Lift


CR Holland Crane Service 


We were proud to be a partner in recent project that brought our crane crew and 60 Ton Link-belt crane to North Central Iowa to lift and move a 32,000 lb. rock from a farm to Arlington Park in Lake Mills, Iowa. 

This rock is part of the Freedom Rock Tour project in Iowa. The artist, Ray "Bubba" Sorenson will paint the rock in a military theme (similar to the photo to the right) this spring. The goal is to have a Freedom Rock in All 99 Iowa Counties. To learn more about the Freedom Rock Tour and projects http://www.thefreedomrock.com/freedom-rock-tour-info/.


lmfreedomrock lmfreedomrock2 lmfreedomrock3 49f6b9dadc783af73f3a0e276135919c

CR Holland Crane Service Recognized for Safety Commitment


CR Holland Crane Service Recognized for Commitment to Crane Safety 

Forest City, IA (October 6, 2016) — CR Holland Crane Service was commended today by the Nncccoplaqueational Commission for the Certification of Crane Operators (NCCCO) as having demonstrated its commitment to safety by hiring CCO-certified personnel. By participating in NCCCO’s Committed to Crane Safety programs CR Holland Crane Service demonstrates that it strives for excellence in its hiring and training efforts and works hard to earn, maintain, and protect its safety reputation in the industry.

Crane operators, signalpersons and riggers receive recognition for their knowledge and skill related to safe crane operations when they are issued a CCO certification. CR Holland Crane Service, has expended time, effort, and resources to obtain certification for its crane operators and riggers and NCCCO recognizes this commitment to safety through its Committed to Crane Safety programs.

“NCCCO’s Committed to Crane Safety program is a means for safety-conscious employers such as CR Holland Crane Service to show their clients, potential clients, and employees that they are serious about crane safety and that they have taken proactive steps to ensure that their employees have the knowledge and skills to perform their assigned job duties safely,” said NCCCO Executive Director Graham Brent. “NCCCO is delighted to welcome CR Holland Crane Service into this pre-eminent group of companies who have distinguished themselves in their dedication to crane safety through their commitment to professional training and CCO certification,” he said. 

To qualify for the Committed to Crane Safety programs, CR Holland Crane Service was required to demonstrate its commitment by providing information about its crane safety policies such as the percentage and/or number of operators and other workers who are CCO-certified, a copy of its hiring policy regarding CCO certification, and the number of years the policy has been in place. CR Holland Crane Service’s recognition is valid for one year after which an opportunity for renewal is provided.

About CR Holland Crane Service

CR Holland Crane Service is based in Forest City, Iowa. Founded in 2000, the company grew out of a family-owned business with more than 45 years of experience in machinery rigging and structural moving. CR Holland Crane Services offers a fleet of 12 cranes from 15 ton to 500 ton capacity that service customers in the Midwest. Every crane meets applicable OSHA standards and our operators are fully insured and have all necessary certifications.  www.crhollandcrane.com  


The National Commission for the Certification of Crane Operators (NCCCO) is an independent, non-profit organization established in 1995 by industry to develop and administer a nationwide program for the certification of crane operators and related personnel. Since then NCCCO has administered over 625,000 nationally accredited written and practical examinations and issued more than 120,000 certifications to individuals in all 50 states.

Crane for Sale

FOR SALE:   110 Kobelco Crawler Lattice Boom Crane – CK1100G  SOLD

110 Kobelco Crawler Boom Crane: 
Model #: CK1100G
Year:  2013
150' Main Boom 
Hino Engine, 5248Hours 
Condition:  Good 
Upper boom paint, ball 
Current certification

Kobelco Crane for sale or rent

New Sales Representative hired at CR Holland Crane


A new year brings new sales plans for CR Holland Crane Service. That plan includes a dedicated customer service and sales person to meet with new and existing CR Holland Crane customers.  Ensuring quality customer contact and service is a top priority for our growing business. 

We are pleased to announce that Dustin Huston has joined the team as the Sales Representative for the company.  Dustin was raised in the Forest City area and is currently living in the Norwalk, IA.  His quick wit, friendly personality along with his past experience in construction,  I.T.,  and management make him a good fit for the position. Dustin can be reached at 641-585-2620, cell 641-202-7110  or dustinhuston@crhollandcrane.com

Bridge for Sale at the Holland Corporations

Sister Company, HMR Supplies designed and manufactured a steel bridge for a structural move project this past year.  The bridge is for rent or sale.

  • Bridge sections can be sold together or separately.
  • Bridge sections can be transported by semi truck.
  • Additional capacity data is available upon request. 

Call today for specifications and pricing:  641-585-3630, ask for Paul. 




35545 Hwy 69 North, Forest City, IA  50436


Triggs Enclosed 5th Wheel Trailer for Sale

Triggs Enclosed 5th Wheel Trailer for Sale 

See link for the Cragslist listing  http://masoncity.craigslist.org/for/5303199623.html 

  • Year:  1987
  • Style: ST
  • VIN 117680635
  • 23' Long x 7'10' Wide x 8'6" High
  • Inside dimension from gooseneck to the door is about 15'9"
  • There is an electric winch in the front of the trailer.  
  • The trailer has duals on both axles.

Sold "As Is" condition – $2000.00 

Call 641-585-3630




CR Holland Crane crew works the AC250


The cran crew spends the day with the 300Ton Demag/AC250 to lift and place deadmen and tanks in Iowa.